fox electronics 8086 microprocessor trainer model FX8086 revision 1.0 - 1 - 8086 microprocessor trainer model FX8086 copyright ? 2001 fox electronics all rights reserved fox electronics 65, 3 rd floor, wisma paos, persiaran selangor, section 15, 40000 shah alam, selangor, malaysia. tel: 603-55122388 fax: 603-55139152 website: www.fox-electronics.com
fox electronics 8086 microprocessor trainer model FX8086 revision 1.0 - 2 - main features microprocessor intel 80c86 rom 16k bytes (expandable to 64k bytes) ram 16k bytes static ram (expandable to 64k bytes) serial ports two, rs-232 1 for pc-ade8086 communication 1 for ade8086 usart communication lcd 16 characters by 2 lines inputs standard pc/at keyboard pc control ade8086 software (windows 95/98/nt) digital i/o 48 lines maximum disassembler pc software assembler pc software (downloadable to ade8086) crystal frequency 14.7456 mhz debugger single step, break point and run in ade8086 standalone and pc software expansion 50-pin address, data and control buses header machine code input through keyboard in standalone mode download from pc after assembled on board peripheral ppi x 2, pic, pit, usart, ram 16k byte, rom 16k byte
fox electronics 8086 microprocessor trainer model FX8086 revision 1.0 - 3 - specification microprocessor cpu 8086 operating in minimum mode cgd 8284a clock generator driver. oscillator source is a 14.7456mhz quartz crystal. cpu clock, clk is 4.9152mhz. peripheral clock, pclk, is 2.4576mhz (ideal for baud rate generator). memory eprom 2764 x 2 16k bytes rom (expandable on board to 64k bytes) ram 6264 x 2 16k bytes ram (expandable on board to 64k bytes) on-board peripherals ppi 8255a x 2 programmable peripheral interface providing: 4 off 8-bit parallel ports with handshake lines. pit 8253 programmable interval timer: 3 off 16-bit counter/timer channels. usart 8251a universal synchronous/asynchronous receiver/transmitter or programmable communication interface providing: full duplex asynchronous rs232 link, using standard mc145407 device for level shifting. baud rate software programmable using the 8253. pic 8259a programmable interrupt controller providing: 8 levels of priority for above devices. power supply requirement +5v @1.2a a mains adaptor having the required o/p is supplied as part of the ade 8086 training system notes: every FX8086 comes with a technical reference manual, pc/at keyboard and a standard power supply.
|